The K-Zero SF is the most advanced plate carrier Agilite has produced. It was rebuilt from the ground up with no compromises, drawing on feedback from tens of thousands of users across special operations units worldwide. The patented Micro Warfighter Cummerbund is semi-rigid and one-size-fits-all, delivering genuine load-bearing support with enough stretch for all-day comfort. Three Duraflex quick-release buckles are included and configurable per mission set: two at the sides, one at the shoulder for maritime configurations. The inner plate bags feature heat-release vented zones that wick sweat away from the body. Removable shoulder pads allow operators to run the carrier slick for a low profile or scale up when carrying heavier loads. Cable management, a zip admin pocket, and a reinforced drag handle round out the feature set.

The K19 3.0 is the most reviewed tactical plate carrier on the Agilite platform, with over 4,600 verified customer ratings and a 95% five-star rate. It is built from 1000D CORDURA Mil Spec nylon and designed specifically around comfort for prolonged wear. The proprietary Fast-Adjust Cummerbund can be tightened or loosened by the wearer in real time during operations, without tools or help. The Egress quick-release system allows rapid removal at the shoulders. A triple layer of low-profile fusion foam on the rear plate bag means that this carrier is genuinely comfortable with hard ceramic or steel plates without requiring a separate plate backer. The one-size plate bag fits all common plate sizes including SAPI S, M, and L. Directly compatible with the AMAP III assault pack for no-thread attachment.

The Sub-Zero is the lightest and most low-profile carrier in the Agilite lineup. At 0.57 kg it was designed for rapid deployment, covert operations, and civilian responders who need a no-compromise plate carrier that disappears under a jacket or inside a vehicle. The proprietary V-design distributes the plate weight across eight suspension points for zero hot spots. The included elastic cummerbund is the most modular of its type: the patented design allows switching between Velcro flaps, quick-release buckles, or First Spear tubes on either side. Each side of the cummerbund holds three elastic cells capable of carrying 5.56 and 7.62 magazines, radios, tourniquets, and more, alongside two external MOLLE columns. The rear plate bag is placard compatible for additional mounting options.

The Micro MAP is a compact rear assault panel optimized for raids, CQB operations, and range sessions where sustainment is needed for up to twelve hours. Despite its dimensions of 35 x 28 cm, it holds a full 3-liter hydration bladder, which is more than most back panels on the market manage in the same footprint. Agilite achieves this using a purpose-built SAPI-shaped hydration bladder that fills the available space inside the panel without adding bulk. A stowable beavertail expands the total carrying capacity to 8 liters for helmets, clothing, and additional gear. An integrated pass-through accommodates longer items such as bolt cutters and rifle barrels. Dual built-in admin pockets and integrated cable management channels keep smaller items organized. The Micro MAP attaches to any plate carrier with rear MOLLE and requires no proprietary connectors.

The AMAP III is the full-size member of the Agilite back panel family and one of the most versatile assault packs available anywhere. Its expanding architecture scales from 4 liters in flat low-profile mode for short raids, up to 18 liters fully expanded, plus an additional 8-liter beavertail compartment for helmets, sleeping bags, and sniper mats. The fully loop interior allows Velcro-backed pouches to be placed in any configuration for the wearer's MOS or mission. It attaches directly to Agilite K-series plate carriers without threading MOLLE, meaning the entire gear and sustainment system is accessible with a single grab when needed. Detachable shoulder straps allow standalone carry over any platform. An optional EDC insert kit converts the AMAP III to a laptop-capable civilian pack in seconds, making it a genuine crossover between assault pack and daily carry bag.

The Pincer Placard is the centerpiece of the Agilite mag pouch system. It attaches to the plate carrier in seconds via upper Velcro attachment points and a lower MOLLE lock, creating a solid placard that holds three rifle magazines with firm retention and easy one-handed reindexing. The multi-caliber version accepts 5.56, 7.62x39, and other intermediate-caliber magazines. A dedicated .308 version is also available for 7.62 NATO users. A second-layer MOLLE extension and admin pouch attach behind the Pincer Placard for additional carrying capacity without changing the overall stack width. The complete Pincer Placard Loadout bundle (from €221,60) includes the triple mag pouch and a selection of second-layer extensions pre-matched for immediate use.

The Six Pack Hanger Pouch is designed for operators who need to carry a large number of magazines without the weight or bulk of a dedicated chest rig. It attaches to the plate carrier using upper MOLLE attachment points and sits flush against the front panel, holding six rifle magazines in individual elastic retention cells. Each magazine can be drawn with one hand without collapsing adjacent mags. The Rear Hanger variant (from €89,88) mounts to the rear or lower section of the carrier for additional magazine storage that does not compete with front panel pouch real estate. Both hangers are compatible with K-Zero SF, K19 3.0, Sub-Zero, and any other plate carrier with appropriate MOLLE.

The MD2 is Agilite's compact Individual First Aid Kit (IFAK) pouch, designed specifically for rapid one-handed access by the casualty or a buddy. The pouch mounts via MOLLE and the outer shell pulls away completely in a single motion to expose all the contents at once, without digging or unwrapping. The inner organizer holds a CAT tourniquet, pressure bandage, hemostatic gauze, and other standard trauma items in fixed, instantly identifiable positions. The MD2 is sized to keep a low profile on the carrier while still accommodating a complete trauma kit. It is available in all standard Agilite colors and is compatible with every carrier in the lineup.

The Re-FLEX3D is Agilite's flagship rifle sling and the product of direct feedback from the same units that shaped the carrier lineup. It is a two-point sling built around a 3D-elasticated webbing body that provides constant passive tension against the rifle, keeping the weapon in a controlled position against the body when transitioning to a sidearm or going hands-free. The adjustment mechanism allows the length to be changed with one hand under full gloves, pulling a single tab to shorten or releasing to extend. The sling is fully ambidextrous and the mounting hardware configuration can be changed from the standard sling loop setup to a QD socket setup without tools. At €83,88 it sits at the premium end of the sling market and is matched to the quality standard of the Agilite carrier lineup.